You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 10, 2016 - 10:02:11
Feb 10, 2016 - 10:02:54 Feb 10, 2016 - 10:02:20 Feb 10, 2016 - 10:02:18 Feb 10, 2016 - 10:02:01 Feb 10, 2016 - 10:02:52 Feb 10, 2016 - 10:02:29 Feb 10, 2016 - 10:02:01 Feb 10, 2016 - 10:02:32 Feb 10, 2016 - 10:02:23 Feb 10, 2016 - 10:02:23 Feb 10, 2016 - 10:02:14 Feb 10, 2016 - 10:02:22 Feb 10, 2016 - 10:02:11 Feb 10, 2016 - 10:02:00 Feb 10, 2016 - 09:02:13
Newer

Pre Assembly Setup

Written By: Terence Tam
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

1

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

Introduction

We'll start by prepping parts that require loctite/glue so that they have time to set.

  1. Apply a thin layer of the Loctite 410 to the inside of the nut well. Gently slide an M3 Lock Nut into the nut well, ensuring that the locking side (the white ring) faces upward. Gently slide an M3 Lock Nut into the nut well, ensuring that the locking side (the white ring) faces upward.

    • Apply a thin layer of the Loctite 410 to the inside of the nut well.

    • Gently slide an M3 Lock Nut into the nut well, ensuring that the locking side (the white ring) faces upward.

Author

Terence Tam

Member since: 7/22/15

2,052 Reputation

15 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 719