Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Terence Tam

Edit approved by Terence Tam

Before
After
Unchanged

Step Lines

+[title] Attach Knurled Pulley
+[* black] The knurled pulley, sometimes called a hobbed pulley, is what grips the plastic filament for feeding into the printer
+[* black] Remove the M3 set screw that came with the SeeMeCNC kit and reinstall with thread-locking set screw
+[* black] Line up the center of the knurling pattern with the center of the ball bearing. Note the orientation of the pulley. Tighten the set screw down onto the flat of the stepper motor shaft.