Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

When the printer first power up, all the motors engage and will attempt to hold position.

Verify that the motors are indeed energized, and holding position by trying to lightly move the carriage up and down by hand. The carriage should hold position. If the motors do not engage, something is wrong with the motor wiring or with the board.

Click "Release" under the Movement Controls tab to unlock all the motors. The three carriages should move freely up and down with the motors released.

Your contributions are licensed under the open source Creative Commons license.