Skip to main content
/

Site Navigation

Your Account

Choose Language

Help
Editing Step 14 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Step Type:

Drag to rearrange

Now, let's verify heated bed functionality. As with the hot end thermistor, verify that the heated bed thermistor reads back a sensible value (15-30 deg C, depending on your ambient conditions).

Troubleshooting tip: 0 deg indicates a broken connection, an abnormally high (>500 deg) temp indicates a dead short.

Preheat the bed to 60 degs. Bed should reach 60 deg C in about 2 minutes.

Your contributions are licensed under the open source Creative Commons license.