Skip to main content
  1. In order to facilitate the retraction of the auto-probe, file way the sharp edge on the bottom of the auto probe body (shown in red on CAD screen shot).
    • In order to facilitate the retraction of the auto-probe, file way the sharp edge on the bottom of the auto probe body (shown in red on CAD screen shot).

    • This will reduce the force required to retract the auto probe.

Finish Line

One other person completed this guide.

Terence Tam

Member since: 07/22/2015

2,025 Reputation

15 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 432